• Home
  • New/Updated Standards Since 2014
 

Standards & Committees


New or Revised SSPC Standards


2014 - Present


This page contains a list of SSPC standards either new or updated from 2014 to the present. For a list of all active SSPC standards and the date of most recent revision, visit Latest Revision Dates of SSPC Standards


Updated March 15, 2017


DesignationTitleDate of Revision
SSPC-PA 2Procedure for Determining Conformance to Dry Coating Thickness RequirementsJanuary 26, 2015, ed. rev. March 15, 2017
SSPC-SP COMSurface Preparation Commentary (not a consensus standard)March 6, 2015, ed. rev. March 15, 2017
SSPC-AB 1Mineral and Slag AbrasivesJanuary 2015, ed. rev. March 15, 2017
SSPC-TU 3Overcoating Existing Coatings on Steel SubstratesMarch 1, 2017
SSPC-CPC 1/NACE SP21412Corrosion Prevention and Control PlanningDecember 2016
SP WJ-1Waterjet Cleaning of Metals — Clean to Bare SubstrateJanuary 5, 2017
SP WJ-2Waterjet Cleaning Metals — Very Thorough CleaningJanuary 5, 2017
SP WJ-3Waterjet Cleaning Metals — Thorough CleaningJanuary 5, 2017
SP WJ-4Waterjet Cleaning Metals — Light CleaningJanuary 5, 2017
SSPC-Guide 22Use and Retention of Pre-Construction Primers on Steel in ShipbuildingNew December 5, 2016
SSPC-PS 26.00Aluminum-Filled Epoxy Coating System Materials Standard, Performance-BasedDecember 5, 2016
SSPC-AB 1Mineral and Slag AbrasivesJan-15, ed. rev. Dec. 1, 2016
SSPC-Paint 24

Latex Exterior Finish Coat for Steel Surfaces, Performance-Based

October 3, 2016
SSPC-Guide 12Guide to the Illumination of Industrial Coating ProjectsOctober 3, 2016
SSPC-CS 23.00/AWS C2.23/NACE No 12Specification for the Application of Thermal Spray Coatings (Metalizing) of Zinc, Aluminum, and Their Alloys and Composites for the Corrosion Protection of SteelMay 10, 2016 (released for publication September 8, 2016)
SSPC-PA 2 Procedure for Determining Conformance to Dry Coating Thickness RequirementsJanuary 26, 2015, ed. rev. August 15, 2016
SSPC-ACS 1/NACE No. 13Industrial Coating and Lining Application Specialist Qualification and CertificationMarch 28, 2016 (released June 10, 2016)
SSPC-PA 1Shop, Field and Maintenance Cleaning of MetalsJune 1, 2016
SSPC-SP 5 (WAB)/ NACE WAB-1White Metal Wet Abrasive Blast CleaningAugust 2015, released March 17, 2016
SSPC-SP 6 (WAB)/ NACE WAB-3Commercial Wet Abrasive Blast CleaningAugust 2015, released March 17, 2016
SSPC-SP 10 (WAB)/ NACE WAB-2Near-White Metal Wet Abrasive Blast CleaningAugust 2015, released March 17, 2016
SSPC-SP 7 (WAB)/ NACE WAB-4Brush-Off Wet Abrasive Blast CleaningAugust 2015, released March 17, 2016
SSPC-SP 14 (WAB)/ NACE WAB 8Industrial Wet Abrasive Blast CleaningAugust 2015, released March 17, 2016
SSPC-AB 2Cleanliness of Recycled Ferrous Metallic AbrasivesMarch 2015, ed. rev. February 2016
SSPC-AB 1Mineral and Slag AbrasivesJan-15, ed. rev. Dec-16
SSPC-Paint 46Elastomeric, Water-Based, High-Build, Flat Coating for Masonry and ConcreteNew Nov-15
SSPC-Paint 42Epoxy Polyamide/Polyamidoamine Primer, Performance-BasedOctober 19, 2015
SSPC-PA 9Measurement of Dry Coating Thickness
Using Ultrasonic Gages
July 20, 2015 ed rev. August 8, 2015
SSPC-Guide 7Guide to the Disposal of Lead-Contaminated Surface Preparation DebrisJuly 9, 2015
SSPC-Paint 16Coal Tar Epoxy Black (or Dark Red) PaintNov 2006, reaffirmed June 15, 2015
SSPC-Paint 32Coal Tar Emulsion Coating
SSPC-Paint 33Coal Tar Mastic, Cold-Applied
SSPC-TU 7Conducting Ambient Air, Soil, and Water Sampling of Surface Preparation and Paint Disturbance ActivitiesMay 4, 2015
SSPC-Guide 6Guide for Containing Surface Preparation Debris Generated During Paint Removal OperationsMay 4, 2015
SSPC-TU 12Ambient-Curing Fluoropolymer Finish Coats Applied to Metal SubstratesPublished
May 4, 2015
SSPC-Guide 21Gude to Evaluation of Slip and Fall Resistance of Flooring SurfacesPublished
May 4, 2015
SSPC-SP 1Solvent CleaningApril 23, 2015
SSPC-Paint 39Two-Component Aliphatic Polyurea Topcoat, Fast- or Moderate-Drying, Performance-BasedApril 23, 2015
SSPC-SP COMSurface Preparation Commentary (not a consensus standard)March 6, 2015
SSPC-QP 8Standard Procedure for Evaluating the Qualifications
of Contracting Firms that Install Polymer Coatings, Surfacings, Linings
or FRP Composites on Concrete and Other Cementitious Substrates
March 2, 2015
SSPC-QS 1Standard Procedure for Evaluating a Coating Contractor’s Advanced Quality Management SystemMarch 2, 2015
SSPC-AB 2Cleanliness of Recycled Ferrous Metallic AbrasivesMarch 2, 2015
SSPC-AB 1Mineral and Slag AbrasivesJanuary 12, 2015, ed. rev. Aug 7, 2015
SSPC-PA Guide 13/AASHTO-NSBA S8.1Guide Specification for Application of Coating Systems with Zinc Rich Primers to Steel BridgesDecember 30, 2014
SSPC-Guide 20Guide for Applying Thick Film Coatings and Surfacings Over Concrete Floors
(replaces SSPC-TU 10 of same title)
May 5, 2014
SSPC-QP 7Procedure for Evaluating Coating Contractors With Limited Work ExperienceApril 9, 2014, ed. rev. July 17, 2015
SSPC-Paint 29Zinc Dust Pigmented Primer, Performance-BasedFebruary 24, 2014
SSPC-QP 9Standard Procedure for Evaluating the Qualifications of Commercial Painting and Coating ContractorsJanuary 3, 2014