SSPC Specialty Module CD's
Click here to purchase on the SSPC MarketPlace
Water Jetting Specialty Module CD
Description: 1 day training and 1 day hands-on.
This program describes the fundamentals of high pressure and ultra high pressure waterjetting as a surface preparation method to remove existing coatings prior to recoating.
This module will help contractors meet the Full Body of Knowledge as outlined in SSPC ACS-1/NACE 13.
The CD will provide you with a complete plan on how to successfully provide the training to your workers on the topics below.
Course Content
– Surface Preparation Overview
– Basic Safety Awareness Overview
– Equipment and Productivity
– Review of Waterjet Cleaning to SSPC SP-12/NACE 5
– Use of SSPC VIS 4/NACE VIS 7
–Wet Abrasive Blast Cleaning
The CD Contains:
- Student Manual, Written Exam, Answer Key, Instructor Manual, Slide Presentation
Member Cost: $99.00
Non Member Cost: $149
Plural Component Specialty Module CD
Description: 1 day training and 1 day hands-on.
This course is designed to train coating applicators in the application of protective coatings by airless spray using plural component spray equipment. The program focus is on the application of two component epoxy and polyurethane protective coatings in a marine/industrial environment on steel or concrete.
This module will help contractors meet the Full Body of Knowledge as outlined in SSPC ACS-1/NACE 13.
The CD will provide you with a complete plan on how to successfully provide the training to your workers on the topics below.
Course Content
- Introduction to Plural Component Spray Technology and why its used
- Introduction to and overview of plural component equipment operational systems
- Characteristics of plural component coatings
- Troubleshooting
- Hands-on and group exercises
The CD Contains:
- Student Manual, Written Exam, Answer Key, Instructor Manual, Slide Presentation
Member Cost: $99.00
Non Member Cost: $149
Coating Concrete Specialty Module CD
Description: 1 day training and 1 day hands-on.
This program gives an overview on concrete components, coating and surfacing types, and surface preparation and substrate repair techniques.
This module will help contractors meet the Full Body of Knowledge as outlined in SSPC ACS-1/NACE 13.
The CD will provide you with a complete plan on how to successfully provide the training to your workers on the topics below.
Course Content
– Concrete Composition
– Coating and Surfacing Concrete
– Condition Assessment
– Planning and Documenting Work
– Concrete Repair and Surface Preparation
The CD Contains:
- Student Manual, Written Exam, Answer Key, Instructor Manual, Slide Presentation
Member Cost: $99.00
Non Member Cost: $149
Thermal Spray Specialty Module CD
Description: 1 day training and 1 day hands-on.
This course covers the fundamentals of applying thermal spray coatings to industrial substrates.
This module will help contractors meet the Full Body of Knowledge as outlined in SSPC ACS-1/NACE 13.
The CD will provide you with a complete plan on how to successfully provide the training to your workers on the topics below.
Course Content
- Introduction to Thermal Spray Technology
- Thermal Spray Application Equipment
- Thermal Spray Coatings and their uses
- Application Technique
- Industry Standards for thermal spray process
- Surface Preparation
- Quality Control
- Safety and Environmental considerations
The CD Contains:
- Student Manual, Written Exam, Answer Key, Instructor Manual, Slide Presentation
Member Cost: $99.00
Non Member Cost: $149
Pipeline Coatings Specialty Module CD
Description: 1 day training and 1 day hands-on.
This course is designed to familiarize the applicator with the types of coating materials applied to steel pipelines placed above ground, below ground and underwater.
This module will help contractors meet the Full Body of Knowledge as outlined in SSPC ACS-1/NACE 13.
The CD will provide you with a complete plan on how to successfully provide the training to your workers on the topics below.
Course Content
– Commonly used coating materials for steel pipelines
– Plant application vs field application
– Above ground coating systems
– Below ground coating systems
– Underwater coating systems
– Federal Regulations
– Industry Standards for pipeline
– Overview of Surface Preparation
– Tape Wrap Systems
– Heat shrink systems
The CD Contains:
- Student Manual, Written Exam, Answer Key, Instructor Manual, Slide Presentation
Member Cost: $99.00
Non Member Cost: $149
Electrostatic Spray Specialty Module CD
Description: 1 day training and 1 day hands-on.
This course is designed to familiarize the applicator with electrostatic spray technology and its uses in the industrial market.
This module will help contractors meet the Full Body of Knowledge as outlined in SSPC ACS-1/NACE 13.
The CD will provide you with a complete plan on how to successfully provide the training to your workers on the topics below.
Course Content
- Introduction to electrostatic technology
- Surface Preparation
-Application
-Application equipment (automated vs manual)
-Electrical field
-Faraday Cage effect
-Inspection and Testing
-Safety precautions
The CD Contains:
- Student Manual, Written Exam, Answer Key, Instructor Manual, Slide Presentation
Member Cost: $99.00
Non Member Cost: $149
Powder Coatings Specialty Module CD
Description: 1 day training and 1 day hands-on.
This course is designed to familiarize the applicator with powder coating technology and its uses in the industrial market.
This module will help contractors meet the Full Body of Knowledge as outlined in SSPC ACS-1/NACE 13.
The CD will provide you with a complete plan on how to successfully provide the training to your workers on the topics below.
Course Content
- Introduction to powder coatings technology
- Types of Powder Coatings (Thermoplastic vs Thermosetting)
- Surface Preparation
-Application of powder coatings
-Faraday cage effect
-Application equipment (Electrostatic vs Fluidized Bed)
-Spray booth
-Curing ovens
-Inspection and Testing
-Safety precautions
- Hands-on and group exercises
The CD Contains:
- Student Manual, Written Exam, Answer Key, Instructor Manual, Slide Presentation
Member Cost: $99.00
Non Member Cost: $149
Specialty Module CD Package
SSPC has added seven new modules to help contractors meet the Full Body of Knowledge as outlined in SSPC ACS-1/NACE 13. The below modules can be purchased on a CD individually or you can purchase all 7 together on one CD.
The CD will provide you with a complete plan on how to successfully provide the training to your workers on the topics below.
MODULES
-Water Jetting -1 day training and 1 day hands-on
- Plural Component - 1 day training and 1 day hands-on
-Coating Concrete - 1 day training and 1 day hands-on
- Thermal Spray - 1 day training and 1 day hands-on
- Pipeline Coatings - 1 day training and 1 day hands-on
-Electrostatic Spray - 1 day training and 1 day hands-on
-Powder Coatings - 1 day training and 1 day hands-on
The CD Contains:
- Student Manual
- Written Exam
- Written Exam Answer Key
- Instructor Manual –(Describes how to teach the supplement)
- Slide Presentation
Member Cost: $499
Non Member Cost: $699 |
